Chipset Products
mmWave 60 GHz chipsets
Peraso's X130 and X720 chipsets combine a multi-gigabit 802.11ad MAC/PHY baseband device with RFIC devices optimized for different applications. The X130 is a flexible solution for consumer electronics and enterprise networks; the X720 is a high-output-power platform for outdoor applications such as Fixed Wireless Access.
The Peraso X720 chipset
Designed specifically for Fixed Wireless Access, the X720 operates across the entire 57-71 GHz unlicensed band with unmatched transmit output power. By supporting 66-71 GHz (802.11ad channels 5 and 6), it avoids the atmospheric absorption that limits range in the lower band, and with 14 GHz of spectrum it delivers multi-gigabit throughput free of 2.4/5 GHz Wi-Fi interference.
PRS4601 — 802.11ad Baseband IC
- 802.11ad compliant PHY
- Maximum data rate up to 4.62 Gb/s throughput
- Single carrier MCS0 to MCS12 (16-QAM)
- Variable rate LDPC FEC
- Full support for beamforming and beam tracking
- USB 2.0/3.0 (5 Gb/s) device controller with integrated PHY
- 802.11ad compliant MAC
- Two integrated RISC CPUs
- On-chip memory for all packet buffering, control and management functions
- Contention-based and scheduled access with highly programmable scheduler
- Full support for A-MSDU, A-MPDU and Reverse Direction
- 128-bit AES security (GCMP)
- Highly configurable peripheral interfaces
- 32 client support
- Support for two connected radios
- 24 configurable, multi-function GPIOs
- Windows, Linux and Android support
- 7mm x 7mm BGA
PRS1165 — 60 GHz Radio IC
- RF chains: 16
- Tx / Rx antenna ports: 16
- Tx output power up to 24 dBm
- Rx noise figure: 7 dB
- PLL tunes to channels 1 to 6 in half-channel steps
- Integrated crystal oscillator
- Configurable filter for optimal 1/2 and 1/4 channel operation
- Supports BPSK, QPSK, 16-QAM single carrier modulation
- Baseband I/Q interface
- 3/4-wire SPI and 10 GPIOs for configuration and control
- 10mm x 13mm BGA
The Peraso X130 chipset
The X130 pairs the PRS1145 and PRS4601 to implement a low-cost, low-power, high-performance SuperSpeed USB 3.0 to 802.11ad 60 GHz system, delivering multi-gigabit throughput for wireless AR/VR, wireless displays, wireless docking, and wireless access to the cloud.
PRS4601 — 802.11ad Baseband IC
- 802.11ad compliant PHY
- Maximum data rate up to 4.62 Gb/s throughput
- Single carrier MCS0 to MCS12 (16-QAM)
- Variable rate LDPC FEC
- Full support for beamforming and beam tracking
- USB 2.0/3.0 (5 Gb/s) device controller with integrated PHY
- 802.11ad compliant MAC
- Two integrated RISC CPUs
- On-chip memory for all packet buffering, control and management functions
- Contention-based and scheduled access with highly programmable scheduler
- Full support for A-MSDU, A-MPDU and Reverse Direction
- 128-bit AES security (GCMP)
- Highly configurable peripheral interfaces
- 32 client support
- Support for two connected radios
- 24 configurable, multi-function GPIOs
- Windows, Linux and Android support
- 7mm x 7mm BGA
PRS1145 — 60 GHz Phased-Array RFIC
- RF chains: 8
- Tx / Rx antenna ports: 16
- Tx output power: 15 dBm (QPSK), 13 dBm (16-QAM)
- Rx noise figure: 7 dB
- PLL tunes to channels 1 to 4 of 802.11ad
- Integrated crystal oscillator
- Supports BPSK, QPSK, pi/2-QPSK, 16-QAM single carrier modulation
- Baseband I/Q interface
- 3/4-wire SPI and 10 GPIOs for configuration and control
- 10mm x 10mm BGA